Ableton Live - 5.0 Bedienerhandbuch Seite 249

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 374
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 248
18.6. COMPRESSOR II 247
better since it reacts more to the actual signal level, while RMS is usually more musical.
But as always if it comes to compression, trust your ears and not the meter!
The most exotic feature of Compressor II is the sidechain EQ. The sidechain is the part of
the signal that is used to control the compressor. Normally the sidechain signal is the same
as the input signal. However, it can make sense to apply some ltering here. Imagine a bass
drum, a snare and some chords in the background. The bass drum has a pretty high level
and it will normally determine how the compressor reacts. If you now turn the side chain EQ
on and set its Frequency to 100 Hz and the Gain to -15 dB, the bass drum will not inuence
the compression anymore and the behavior of the compressor will be very different. You
could also set the Frequency to around 1 kHz and turn up the gain to make the compressor
more responsive to the snare. Since the EQ is only in the sidechain and not part of the
normal signal path, it will not change the sound of the input signal. It only changes how the
compressor reacts to different frequencies of the input.
Unlike Compressor I, Compressor II has a built-in compensation stage that counteracts the
gain loss due to the compression and makes it much easier to adjust the other parameters.
Careful adjustment of attack and release times is essential when it comes to compression of
rhythmical sources. If you are not used to working with compressors, play a drum loop and
spend some time adjusting Attack, Release, Threshold and Gain. It can be very exciting!
Seitenansicht 248
1 2 ... 244 245 246 247 248 249 250 251 252 253 254 ... 373 374

Kommentare zu diesen Handbüchern

Keine Kommentare