Ableton Live - 5.0 Bedienerhandbuch Seite 257

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 374
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 256
18.12. GATE 255
sound by turning up the threshold to where it cuts off reverb or delay tails or truncates an
instrument's natural decay.
The Threshold slider sets the gate's sensitivity. If the gate is open and passing signal (i.e.,
the signal exceeds the gate threshold), the green LED lights.
The Floor parameter located above the threshold fader can allow attenuating signals below
the threshold rather than just cutting them off. If set to -inf dB, a closed gate will mute the
input signal. A setting of 0.00 dB means that even if the gate is closed, there is no effect
on the signal. Settings in between these two extremes attenuate the input to a greater or
lesser degree when the gate is closed.
The Attack time determines how long it takes for the gate to switch from closed to open
when a signal goes from below to above the threshold. Very short attack times can produce
sharp clicking sounds, while long times soften the sound's attack.
When the signal goes from above to below the threshold, the Hold time kicks in. (Note
to tech heads: the gate has hysteresis, so the release occurs about 3 dB lower than the
threshold.) After the hold time expires, the gate closes over a period of time set by the
Release parameter.
Seitenansicht 256
1 2 ... 252 253 254 255 256 257 258 259 260 261 262 ... 373 374

Kommentare zu diesen Handbüchern

Keine Kommentare