Ableton Live - 5.0 Bedienerhandbuch PDF herunterladen (Seite 328)

22.2. V-POTS AND ASSIGNMENT SWITCHES 326

V-Pot when dealing with a control that has various options (lter type choosers, for example),

selects the options in sequence. With controls having only two options (e.g., an on/off

switch) pressing a V-Pot toggles the options.

There are six assignment switches to the right of the channel strips on the Mackie Control.

These select which parameters are displayed in the main display, and set these parameters

to be available for control with the V-Pots. The two-character display above the assignment

switches shows the currently selected assignment mode.

1. I/O  Switches the V-Pot and main display to I/O mode. This allows Live's track

inputs and outputs to be set with the V-Pots.

Click once to select the track's Input Type chooser.

Click twice to select the track's Input Channel chooser.

Click three times to select the Output Type chooser.

Click four times to select the Output Channel chooser.

2. Send  Switches the V-Pot to control the levels of all available Send controls

for the currently selected track. If more than eight sends are available, you can

navigate through them using the previous and next buttons (see item 5, below).

3. Pan  Assigns the V-Pot and main display to the track's Pan control.

4. Devices  Pressed once, this will bring up all available devices for the currently

selected track in the main display. Using the page buttons (see item 5, below),

you can then scroll through the available devices and choose a particular device

to edit by pressing the V-Pot. When you are done editing device settings, you

can change the selected track or press the device assignment switch again to

return to scrolling and selecting devices.

When device settings are being changed, the name and settings of the selected

device are shown in the main display. You can use the V-Pot to change parameter

values as described in the introduction to this section.

1 2 ... 323 324 325 326 327 328 329 330 331 332 333 ... 373 374

Keine Kommentare

Ableton Live - 5.0 Bedienerhandbuch Seite 328